mirror of
https://github.com/FULU-Foundation/OrcaSlicer-bambulab.git
synced 2026-06-06 05:42:59 -04:00
495a71ed00
The two new config keys define a minimum vertical shell thickness. The top shell thickness is calculated as a maximum of sum over top_solid_layers * layer heights and top_solid_min_thickness, the bottom shell thickness is calculated as a maximum of sum over bottom_solid_layers * layer heights and bottom_solid_min_thickness. The results of the formula above are shown at the Print parameter page below the two new values to hint the user about the interaction of the old versus new config values. top_solid_min_thickness has no meaning if top_solid_layers is zero, bottom_solid_min_thickness has no meaning if bottom_solid_layers is zero.
87 lines
3.3 KiB
C++
87 lines
3.3 KiB
C++
#ifndef slic3r_CustomGCode_hpp_
|
|
#define slic3r_CustomGCode_hpp_
|
|
|
|
#include <string>
|
|
#include <vector>
|
|
|
|
namespace Slic3r {
|
|
|
|
class DynamicPrintConfig;
|
|
|
|
// Additional Codes which can be set by user using DoubleSlider
|
|
static constexpr char ColorChangeCode[] = "M600";
|
|
static constexpr char PausePrintCode[] = "M601";
|
|
static constexpr char ToolChangeCode[] = "tool_change";
|
|
|
|
namespace CustomGCode {
|
|
|
|
struct Item
|
|
{
|
|
bool operator<(const Item& rhs) const { return this->print_z < rhs.print_z; }
|
|
bool operator==(const Item& rhs) const
|
|
{
|
|
return (rhs.print_z == this->print_z ) &&
|
|
(rhs.gcode == this->gcode ) &&
|
|
(rhs.extruder == this->extruder ) &&
|
|
(rhs.color == this->color );
|
|
}
|
|
bool operator!=(const Item& rhs) const { return ! (*this == rhs); }
|
|
|
|
double print_z;
|
|
std::string gcode;
|
|
int extruder; // Informative value for ColorChangeCode and ToolChangeCode
|
|
// "gcode" == ColorChangeCode => M600 will be applied for "extruder" extruder
|
|
// "gcode" == ToolChangeCode => for whole print tool will be switched to "extruder" extruder
|
|
std::string color; // if gcode is equal to PausePrintCode,
|
|
// this field is used for save a short message shown on Printer display
|
|
};
|
|
|
|
enum Mode
|
|
{
|
|
Undef,
|
|
SingleExtruder, // Single extruder printer preset is selected
|
|
MultiAsSingle, // Multiple extruder printer preset is selected, but
|
|
// this mode works just for Single extruder print
|
|
// (The same extruder is assigned to all ModelObjects and ModelVolumes).
|
|
MultiExtruder // Multiple extruder printer preset is selected
|
|
};
|
|
|
|
// string anlogue of custom_code_per_height mode
|
|
static constexpr char SingleExtruderMode[] = "SingleExtruder";
|
|
static constexpr char MultiAsSingleMode [] = "MultiAsSingle";
|
|
static constexpr char MultiExtruderMode [] = "MultiExtruder";
|
|
|
|
struct Info
|
|
{
|
|
Mode mode = Undef;
|
|
std::vector<Item> gcodes;
|
|
|
|
bool operator==(const Info& rhs) const
|
|
{
|
|
return (rhs.mode == this->mode ) &&
|
|
(rhs.gcodes == this->gcodes );
|
|
}
|
|
bool operator!=(const Info& rhs) const { return !(*this == rhs); }
|
|
};
|
|
|
|
// If loaded configuration has a "colorprint_heights" option (if it was imported from older Slicer),
|
|
// and if CustomGCode::Info.gcodes is empty (there is no color print data available in a new format
|
|
// then CustomGCode::Info.gcodes should be updated considering this option.
|
|
extern void update_custom_gcode_per_print_z_from_config(Info& info, DynamicPrintConfig* config);
|
|
|
|
// If information for custom Gcode per print Z was imported from older Slicer, mode will be undefined.
|
|
// So, we should set CustomGCode::Info.mode should be updated considering code values from items.
|
|
extern void check_mode_for_custom_gcode_per_print_z(Info& info);
|
|
|
|
// Return pairs of <print_z, 1-based extruder ID> sorted by increasing print_z from custom_gcode_per_print_z.
|
|
// print_z corresponds to the first layer printed with the new extruder.
|
|
std::vector<std::pair<double, unsigned int>> custom_tool_changes(const Info& custom_gcode_per_print_z, size_t num_extruders);
|
|
|
|
} // namespace CustomGCode
|
|
|
|
} // namespace Slic3r
|
|
|
|
|
|
|
|
#endif /* slic3r_CustomGCode_hpp_ */
|