epicknex/OrcaSlicer-bambulab
1
0
Fork 0
mirror of https://github.com/FULU-Foundation/OrcaSlicer-bambulab.git synced 2026-06-06 13:53:05 -04:00
Code Issues Packages Projects Releases Wiki Activity
15,252 Commits 1 Branch 1 Tag
Commit Graph

312 Commits

Author SHA1 Message Date
Vojtech Bubnik
d2c46025c7 Fix of Enforce support for first N layers has no effect #470 2021-02-23 15:31:21 +01:00
enricoturri1966
d3daea2df8 Follow-up of 86d7e1fb907d9841a1d0cf516415fea84e8b5280 - Fixed build warning on OsX 2021-02-18 15:35:38 +01:00
Lukáš Hejl
8f293f0cb5 Fixed unnecessary travels after calling the avoid crossing perimeters when the wipe is enabled. 
When the avoid crossing perimeters was enabled, and the wipe was enabled, there were unnecessary travels in the opposite direction than the wipe travel.
 2021-02-18 14:41:56 +01:00
enricoturri1966
86d7e1fb90 #5538 - Validation of custom g-code against gcode processor reserved keywords 2021-02-18 14:34:40 +01:00
enricoturri1966
50c6fc1719 Tech ENABLE_TOOLPATHS_WIDTH_HEIGHT_FROM_GCODE set as default 2021-02-17 11:23:17 +01:00
Vojtech Bubnik
6ea5781709 Fix of Supports printed too slowly. #984 
Processing of CoolingBuffer is newly staggered for support layers
until the 1st object layer above supports is received by CoolingBuffer.
 2021-02-16 11:30:57 +01:00
Vojtech Bubnik
5e9a8ea700 Fixed some clang warnings 2021-02-09 19:23:58 +01:00
Lukas Matena
1834ebe981 Fixing Clang warnings 3 2021-02-08 17:52:29 +01:00
Vojtech Bubnik
73c9f939e0 Squash merge of lh_brim_rework, 
brim separated to Brim.cpp,hpp
Refactored accessors to PrintObjectPtrs, PrintRegionPtrs, LayerPtrs,
SupportLayerPtrs for const correctness.
 2021-02-03 15:12:53 +01:00
Vojtech Bubnik
c506c15ed4 Manual merge of 4e586b8edabde1146c4013ca2437469a448315e2 from upsteam Slic3r, 
fixing "percent first layer speed was not applied over autospeed." GH upstream Slic3r #2945
our GH issue First Layer Speed Percentage not applying (#5829)
 2021-01-19 16:50:24 +01:00
Vojtech Bubnik
67256d6bb0 Added a FIXME comment for 
Sequential tool path ordering of multiple parts within the same object, aka. perimeter tracking (#5511)
 2021-01-06 12:19:08 +01:00
Lukas Matena
30c8592b10 Do not use ironing extrusions for autospeed calculations (#5082) 2021-01-04 14:21:24 +01:00
Lukas Matena
837070a246 Hotfix of a crash with raft and one-layer object (#5652) 
The problem is that PrintObject support generator is only run when m_layers.size() > 1, so one-layer object will skip it.
It apparently never worked, after recent refactoring (probably 8bfc986) it started to crash in GCode generator.
This commit fixes the crash, but not the problem. The raft is still not generated (like in all versions since 2.0.0 at least).
 2021-01-04 14:21:24 +01:00
Lukas Matena
1cbe2bd87e Added a missing translation macro 2020-12-18 13:04:28 +01:00
Lukas Matena
a5d363a9f4 Do not emit M1 gcode for firmwares other than Marlin (after MM priming) 
The M1 gcode is apparently only supported on Marlin, others do not support it or use it for something else
This should fix #5441
 2020-12-14 20:27:19 +01:00
Vojtech Bubnik
298b730589 Implemented linear tapering of extrusion rate for the 1st spiral vase layer 
above the solid infill. Should fix
first layer of vase (after bottom layers) is bulging (0.6nozzle, 0.4 layerhight) #3712
Adjust flow of the "second" layer in spiral vase mode #2795
 2020-12-09 14:54:26 +01:00
Vojtech Bubnik
7353d8c6e9 Rework of Add random function for gcode macros. #5219 after merge: 
The thread local storage variables for the random number generator
were replaced by an external context variable.
Thread local storage is a scarce resource.
 2020-12-09 09:19:46 +01:00
enricoturri1966
b7ac74bc42 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-12-08 15:56:08 +01:00
enricoturri1966
5bd443cd1f #4936 - Take toolpaths width and height from gcode decorations, if available 2020-12-08 15:55:53 +01:00
Vojtech Bubnik
5f456ebbe7 Merge branch 'lh_avoid_crossing_perimeters' 2020-12-08 13:39:33 +01:00
enricoturri1966
f77475e501 Tech ENABLE_SHOW_WIPE_MOVES set as default 2020-12-07 10:29:50 +01:00
Vojtech Bubnik
3dd9b8c718 Further improvement error reporting with buggy custom G-code sections #1516 
1) The macro-processor sanitizes the source code line for invalid UTF-8
   characters. Ideally these invalid characters would be replaced with ?,
   they are just dropped as of now. Better than showing an empty string
   when converting to wxString though.
2) G-code export collects full error message for 1st occurence of an error
   for each custom G-code block.
3) The composite error message now displays the errors collected in 2).
4) The error window is now scaled bigger and the Slicer logo is smaller
   if the text is to be rendered with monospaced font, as the monospaced
   text will not be word wrapped.
 2020-12-03 12:50:24 +01:00
Vojtech Bubnik
306acbdfb4 Improvement of Improve error reporting with buggy custom G-code sections #1516 
Errors in the file output templates are reported in mono-spaced font,
so that the arrow character ^ is displayed at the right column
pointing to the offending spot.
 2020-12-03 11:03:16 +01:00
Lukáš Hejl
f25e5c0ec6 Merge remote-tracking branch 'origin/master' into lh_avoid_crossing_perimeters 2020-12-01 14:31:22 +01:00
Vojtech Bubnik
e62bb4a7c7 Fix of Head crash on completion with sequential printing #5349 
In addition to an existing "layer_z" placeholder variable,
a new "max_layer_z" has been added to custom G-code sections accumulating
maximum of "layer_z" over the print. This value may be used for example
in the end G-code of a sequential print to lift the print head
up before travel over the whole print bed.
 2020-12-01 08:23:46 +01:00
Lukáš Hejl
87879034f6 Merge remote-tracking branch 'origin/master' into lh_avoid_crossing_perimeters 
# Conflicts:
#	src/libslic3r/MotionPlanner.cpp
#	src/libslic3r/libslic3r.h
 2020-11-29 17:27:23 +01:00
Lukas Matena
f485f66b2a Seam - fix indexing of layers (#5112, #5014) 2020-11-27 10:09:20 +01:00
enricoturri1966
0e6acbc0e2 Preview - Visualization of wipe mones 2020-11-21 10:36:10 +01:00
Lukáš Hejl
606db666fc Fix missing include 2020-11-20 14:22:24 +01:00
YuSanka
feffb66085 Ruler for DoubleSlider: Added estimated print time 2020-11-18 05:02:51 -08:00
Vojtech Bubnik
62ab17bf6e AvoidCrossingPerimeters: Refactored for better encapsulation. 2020-11-17 10:42:27 +01:00
Vojtech Bubnik
04c2fde671 Removed the old motion planner. 2020-11-17 09:33:30 +01:00
Lukáš Hejl
ef9de07740 Disabling wipe for avoid crossing perimeters 2020-11-16 14:22:32 +01:00
Lukáš Hejl
8adf02a289 Moved AvoidCrossingPerimeters to separate file 2020-11-16 14:22:32 +01:00
Lukáš Hejl
4288be0e06 Fixed a case when the intersection is one of the endpoints of the line 2020-11-16 14:22:32 +01:00
Lukáš Hejl
c828a5d6e9 Added the possibility to set the maximum length of the detour 2020-11-16 14:22:32 +01:00
Lukáš Hejl
c16aad7e0b Reworked the algorithm for avoid crossing perimeters for multiple objects 2020-11-16 14:21:36 +01:00
Lukáš Hejl
69658a57d8 Fixed crossing perimeters in some cases 2020-11-16 14:21:36 +01:00
Lukáš Hejl
556c212f9d Fixed crossing perimeters when option "Wipe while retracting" is enabled 2020-11-16 14:21:36 +01:00
Lukáš Hejl
39e3358af5 Avoid crossing perimeters bugfix 2020-11-16 14:21:36 +01:00
Lukáš Hejl
a4fc435f75 Clear generated boundaries from previous layer 2020-11-16 14:21:36 +01:00
Lukáš Hejl
5c073d0ddb Improved documentation of avoid crossing perimeters algorithm. 2020-11-16 14:21:36 +01:00
Lukáš Hejl
46bae74e48 Finalization of avoid crossing perimeters algorithm 
EdgeGrid::Grid is used to find the intersection of a path with a polygon.
Simplification of find path.
Calculation of boundaries that not be crossed.
 2020-11-16 14:21:36 +01:00
Lukáš Hejl
074406647a Fixed bug when algorithm stuck in a loop 2020-11-16 14:21:36 +01:00
Lukáš Hejl
6573bc15a5 Selection of shortest path around polygon boundary 2020-11-16 14:21:36 +01:00
Lukáš Hejl
7a4ba7d131 A simple algorithm to follow the boundary of polygons 2020-11-16 14:21:36 +01:00
enricoturri1966
f1d10f3c90 ENABLE_GCODE_VIEWER set as default in libslic3r 2020-11-12 14:03:58 +01:00
enricoturri1966
8491872fb7 #5079 - Fixed GCode Viewer changing files modified date on Windows 2020-11-05 14:02:43 +01:00
enricoturri1966
747fcb1d07 Follow-up of d2e5be89e3460964fb3c38db066a21020de0f0db -> Fixed processing of color print, pause print and custom gcode tags 2020-11-04 13:33:27 +01:00
Vojtech Bubnik
afaa7a4cc2 Manual merge of Increased filament stats precision in generated gcode file #780 2020-10-28 10:46:59 +01:00